Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Headsets

Trek Madone Factory Overstock Top Half Headset
$79.99
- Upper Headset Assembly for 2010+ Madone - Bearing, Compression Ring, 15mm Top Cap - Go green and save green — Zero packaging means zero waste and zero extra cost
Cane Creek 40 Series Integrated Bottom Bearing
$30.50
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
Origin8 Headset Spacers (1 1/8-inch/10-pack)
$9.59 - $15.59
Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.
Origin8 Carbon Fiber Headset Spacers
$21.59 - $22.79
Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.
Origin8 Star Nut
$2.99
Standard replacement star nuts for threadless steerers.
Chris King InSet 5
$170.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 5 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 49mm headtube.
Cane Creek 40 IS41 Headset Top
$36.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g
Cane Creek 40 Series Integrated Headset
$52.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Cane Creek 40 Series ZeroStack Top Cover
$36.00
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Chris King Headset Spacer Kit
$44.00
Get some of the most precisely machined spacers on the market. Available in lots of fun colors, Chris King's spacer kits include one each of their 25mm, 12mm, 6mm, and 3mm spacers.
Cane Creek 110 ZS44/ZS56 Headset
$160.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. This is a tapered headset intended for forks that require a 44mm top headtube diameter, and a 56mm bottom headtube diameter. T • Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/x • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 4mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 88.47g
Cane Creek 110 ZS56 Conversion Headset Bottom
$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. Technical Description: ZS56/30/H4/x Bottom Type: ZS - ZeroStack Bottom Head Tube Inside Dia.: 55.95mm Crown Race Seat Dia.: 30.015mm Crown Race Type: Aluminum, Dual-Seal Bottom Stack Height: 4mm Bottom Bearing Type: Top-quality, sealed stainless steel bearings Material: 7075 aluminum Weight: 61.34g Part Number: BAA0156x
Cane Creek Crown Race
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction
Cane Creek 10 Series Internal Cup ZeroStack Headset
$44.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 10 Series has light, tough and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
Origin8 SSR Threadless Headset
$53.59
Origin-8's SSR Threadless Headset is for 1 1/8-inch threadless forks. It features CNC machined 7075-aluminum cups and stainless-steel cartridge bearings for excellent performance and long life. It also comes in many colors to customize your ride. - 93g including star nut and laser top cap - Stack Height: 28.5mm **Anodized colors will vary from batch to batch and may not match exactly - S.H.I.S.: EC34/28.6|EC34/30
Cane Creek 110 IS41 | IS52 Headset
$130.00
Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of their 110-Series, they did just that—choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset. - Technical Description: 110-Series IS41/28.6/H9 | IS52/40 - Top Type: IS - Integrated - Top Head Tube Inside Dia.: 41.1mm - Stem Clamp Dia.: 28.6mm - Top Stack Height: 9mm - Top Bearing Type: Top-quality, sealed stainless steel bearings - Bottom Type: IS - Integrated - Bottom Head Tube Inside Dia.: 52.1mm - Crown Race Seat Dia.: 39.79mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 1mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: N/A - Weight: 79.48 grams
Cane Creek 110 IS52 Conversion Headset Bottom
$51.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Weight: 45.25g
Chris King Base Plates
$20.00 - $26.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes
FSA Orbit C-40 ACB
$46.99
- Bearing Type: Cartridge - Weight: 86 g - Crown Race: 40 - S.H.I.S Lower: IS52 - S.H.I.S Upper: IS42 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
FSA Polycarbonate Headset Spacers
$14.99 - $16.50
- PolyCarbonate headset spacers with the FSA logo - Variety of colors, sold in bags of 10
FSA Pig Series Headset
$26.99 - $54.99
- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup - Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings - Big Fat Pig feature super oversized caged ball bearings - Pig: External Cup, traditional - Pig S.H.I.S.: EC34/28.6|EC34/30 - Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40 - Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro) - Color: Black - Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)
FSA Orbit Equipe
$40.99
A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Cane Creek 10 IS52 Headset Bottom
$18.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: IS52/40/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide • Material: N/A • Weight: 35.35g
Cane Creek 110 EC34 Headset Top
$85.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: EC34/28.6/H16/x • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 34mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 55.26g
Origin8 Twistr Integrated Headset
$32.19 - $37.59
The Origin8 Twistr Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut
Chris King InSet 7
$165.00 - $170.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 7 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44mm headtube.
Cane Creek Interlok Spacers
$10.50 - $11.00
- color-matched aluminum Interlok Spacers for Cane Creek headsets
Cane Creek 110 IS41 Headset Top
$82.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty! • Technical Description: IS41/28.6/H9/x • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 41.81g
Cane Creek 110 EC34 Headset Bottom
$59.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC34/30/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 33.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 42.20g
Cane Creek 40 Series Integrated Headset (Italian)
$52.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Page 1 of 3 Next page