Filter By:
BMX
$44.99
Odyssey JC/PC Pedals are designed with replaceable pedal bodies, pins, and nuts.
- No bearings, adjustable bushing tension
- Two-piece plastic bodies with replaceable metal pins and CroMoly spindles
$23.99
- 4140 Chromoly
- 3 Possible peg positions for longer peg life
- 14mm with 3/8-inch adapters included
- 4 inches (length) x 1-3/8 inches (outer diameter)
- Sold in pairs
- 8.75 oz (17.5 oz for a pair)
$74.99
A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders.
- Fully welded joint construction
- Directional spoke hole drilling
$13.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: X-Long
- Diameter: 1.5mm
$19.99
- Precise fit and smooth function
- Great cable travel range
- Shielded cables for durability
- Includes upper and lower cables
- Use: 1-1/8" BMX
$8.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$13.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut.
- 6061-T6 aluminum construction.
- Standard 1-1/8-inch size.
$10.99 - $11.99
Cornerstone Grip features a ribbed design with Cornerstone logo.
- Includes Odyssey Par Ends
$16.99 - $19.99
Odyssey Bluebird chain is the proven and reliable KMC 510-HX chain with an added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
- Proven and reliable KMC 510-HX chain
- Factory installed half-link for a radically stronger set-up
$13.99 - $19.99
Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated.
- High-strength plastic composite
$22.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$19.99
GSport's new steel pegs are Van Homan approved. It features three rotation positions and are reinforced internally for longer life.
Sold Individually.
TECHNICAL SPECIFICATIONS
- Material: Heat Treated 4140
- Length: 108mm / 4.25"
- Diameter: 39mm / 1.5"
- Configuration: 14mm or 3/8"
- Rotation Positions: 3
- Weight: 213 grams / 7.5oz
$14.99 - $21.49
- Threads onto 3/8" axles
- Double-sided
- Oversized
- Alloy
- Length: 3" / 74mm
- Width: .94" / 24mm
- Sold as a pair
$30.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 10mm, 3mm and 2mm (15mm total)
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1-1/8 integrated headset.
- 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 25mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$9.99 - $26.99
- Press fit designed to work the hub's non-drive side collar.
$59.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths.
- 7075 Aluminum
$30.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$13.99
The Springfield lever features an easy to install and remove design.
- Easy to install and remove without having to wrestle grips on and off
- Die-cast clamp design
$22.50
The Odyssey Medium Monolever is a favorite with its familiar feel, smooth edges and variety of handle options.
- Fits 7/8" bars, has a hinged bracket, and does not include cable knarps
$35.99
- Super hardened nylon construction
- 40mm diameter, 100mm length
- Special insert fits 3/8" or 14mm axles
- 90g (pair)
$30.99
- Forged alloy construction
- Double bolt centering design
- Oversize 6mm hex bolts
$19.99
The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy.
- For rear use only
$8.99
The Gost pads feature a unique design to make install and set up easier.
- Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame
- Assembly is simplified by lining up the rim and tightening a M6 female bolt
$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
$34.99
The Mike Aitken signature BMX seat is a stylish and durable, that's tear and scuff resistant.
$89.99
The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar.
- 41-Thermal processed 4130 chromoly
- Multi-butted
$22.99
- CNC machined 6061-T6 aluminum chain tensioners
- Compatible with 3/8 inch and 10mm axles
- Single bolt operation makes tensioning a simple task
- Material: 6061AL
$29.99
- 4130 chromoly axle pegs with 3 position anti-rotation set screw
- Designed for use with 14mm or 3/8" axles (with adapter)
- 4130 chromoly offers a durable, long lasting peg with a smooth grind
- 3 set screw positions extend the life the of the peg
- Axle: 14mm / 3/8"
- Diameter: 35mm
- Material: Chromoly
- Sold in pairs
$13.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration.
FEATURES
- Adjustable hanger slot allows upper cable to rotate for optimum alignment.
- The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex.
- Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh.
- All Odyssey Linear cables are offered with the K-Shield housing.
- Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included.
SPECS
- Housing length: 995mm
- Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended.
- Brake requirements: Open-ended U-brake arms.
- Works with most brake levers.
- Velcro strap included.
$10.99 - $11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort.
- 160mm
$21.99
The Silencer V2 has a lightweight 6061 aluminum core supports the entire sleeve. The sleeve is made from our proprietary Thermalite material and resists cracking and deformation while sliding better than chromoly on most surfaces. The lengthy 4.4" peg ensures you maintain locked into grinds.
- Axle: 3/8" with included 10mm adapter
- Diameter: 1.6"
- Length: 4.4"
- Weight: 5.3-ounce each
- Sold individually
$8.99 - $10.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$22.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
$9.99 - $11.99
Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance.
- 160mm lenght
- Par Ends Included
$11.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz).
- Black
- 60 – 65mm
$4.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
$8.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$6.50
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic.
- Sold singly
$39.99
- Super hardened Cr-Mo/Nylon construction
- 40 x 100mm
- Special insert fits 3/8" or 14mm axles
- Diameter: 40mm
- 320g (pair)
- Material: Chromoly Core w/Nylon Sleeve
- Sold in pairs
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$26.49
- Steel
- Threads onto 3/8" axle
- Knurled & grooved
- Diameter: 33mm
- Sold in pairs
$13.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 7.5 – 9.5-inch
- Diameter: 1.5mm
$15.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 11 - 12.5"
- Diameter: 1.5mm
$30.99
This plastic peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve.
- 1.5-inch outer diameter
- 14mm with 3/8-inch adapter
- Sold individually
- Weight: 7.6oz
- Replacement sleeves sold separately
$6.99
Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer).
- Length: 4.4-inch
- Diameter: 1.6-inch
- Material: Plastic (Thermalite)
- Weight: 0.8- ounce each
- Replacement sleeve only
- Sold individually
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs.
SPECS
- Forged from 7075-T6 aluminum for greater strength and durability
- Steel insert prevents guard deformation, prolonging bearing life
$28.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install.
SPECS
- 25.4mm diameter
- 6061-T6 Aluminium, CNC machined
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
$6.99
The M2 lever works with a single cable or Odyssey's dual cable system.
- Improved braking power for Gyro users
- Left/Right hand compatible
$34.99
Tom Dugan's signature Dugan tire features a fast center tread for park, street and dirt.
- Dual ply casing
$28.49
- Allows the use of wheels with 3/8" axles to be used with frames or pegs requiring 14mm axles
- Durable chromoly construction
- Sold in pairs
$29.99
8 spline BMX bottom bracket Spindle with bolts.
- Diameter: 19mm
- Crank arm Interface: 8-spline
- Length: 150mm
- Bolts included
$15.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Dual Cable
- Diameter: 1.5mm
$13.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Lower
- Length: Fits most
- Diameter: 1.5mm
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered.
Available in 14mm or 3/8?.
$49.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
$109.99
A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability.
- Multi-Butted, traditional 7/8" crossbar for strength
- Large radius bends for greater durability
- Welded end caps to reduce flex
- Post-weld heat-treated for added strength
Page 1 of 1