Other

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Model: Replacement bolt - Compatibility: Allen, M5x16

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Replacement bearing for the lower half of YST8003 #7 headset.

- Routes cables underneath the bottom bracket - Will not rust or corrode

- 8x1mm Allen head

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

- Crown Race - Size: 27.0mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Type: Lock washer - Size: 1" Keyed

- Rubber - Color: Black

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Aluminum w/lock nut and mount - Slotted mount design

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Crown Race MX - Size: MX TH 26.4mm

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

BB30 Spacer - 15.46mm

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Standard replacement star nuts for threadless steerers.

- For MTB levers - 7mm x 1mm - Aluminum construction

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Flat head screws from Wheels Manufacturing.

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

Complete remotes and remote components for KS dropper posts.

- w/Nut - 1-3/4-inch

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Hope Brake Lever Parts

FSA Mega Exo Small Parts.

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Standard steel replacement